Suspended ceiling installation with his hands

Suspended ceiling Installation with his hands with expert suggestions and will answer about how to install suspended ceiling in your residence

In the very first you must see our catalog :

Leading ten suspended ceiling tiles and styles

See also lately catalog:

Best 20suspended ceiling lights and lighting tips

How to install suspended ceiling :

Installation of suspended ceiling with his hands made by screwing it to the carrier profile attached to the wall. Metal profile is several occasions stronger than the profile of the tree, and thus they can be adjusted with an accuracy of 1 mm.

Suspended ceiling installation

Suspended ceiling can have several levels.

When installing plasterboard ceiling must:

1. First of all, on the perimeter of the area, on the walls set the carrier profiles.


2. Then the ceiling, at a distance of long sheets of drywall, you need to attach the other carrier profiles.


3. Between bearing profiles attached transverse profiles in order to strengthen the structure.


4. In the middle of all the suspension system should be attached to the ceiling in addition to particular hangers. It must be carried out in order to not cave ceiling.

For suspended ceilings can be hidden pipes, communication, and make the area a lot more harmonious.

Metal profiles in the harness are very good that mount ceiling with his hands and can not professional.

Right after fixing the sheets of drywall, you need to joints in between the sheets for this sealed their paper tape. It is advised also to caulk or screw heads. These places require to putty a number of occasions, giving the preceding layer to dry putty and sanded it. Right after completion of the whole ceiling putty need to when again sanded, removing any excess putty with a spatula.

Gap that remains among the ceiling and the wall need to have repaired acrylic mass. Its not necessarily putty.

Do not miss pay a visit to :Installation drywall and plaster ceiling

Connect sheets of cardboard for suspended ceiling

The gap in between the sheets are sealed paper and putty. At initial it is necessary to fill the gap putty plaster, and then push the paper into a mass that is not but dry.

It is needed to strengthen the connections. When the initial layer has dried, the second need to be applied to the paper by filling irregularities. At the third want leveled whole surface at zero, let it dry and sanded.